We introduced Oxy Rocks in spring of 2008 and are celebrating our first anniversary.
Directions for use: Oxy Rocks Concentrated solution was developed to be diluted between 5:1 and 20:1 with common tap water. This cleaner is non-gaseous, and produces no dangerous fumes. It works well at room temperature, also in an ultrasonic bath. If heat is used, optimal results are found at around 120F. Solution becomes corrosive at temperatures above 150F. Always test on small amount of any lesser specimens before cleaning your prizes.
Methods for best results: This solution is aggressive on zinc, calcium, manganese, and possibly other minerals; always test with lesser specimens to evaluate the reaction. It is less aggressive on stubborn or complex iron stains.
General Use: 1) Clean specimen with water or soap and water. Use a toothbrush or scrub brush as needed, avoid brass or metal brushes. Remove as much dirt and loose matter as reasonable. 2) Check your tap water before making solution, if pH is 8 or higher consider using distilled water; if lower than 7, this will aid the solution. Oxy Rocks works best between a pH of 0.5 and 4.0, the optimal pH is around 2.0. Make a solution approx. 20:1 to start with (2.5 to 3 ounces to a gallon of water) in a plastic container with lid to prevent spillage. 3) Immerse specimen with tongs or rubber glove. Wait, be patient. Check daily, look for residual to appear on bottom of container. You can rinse and re-scrub specimen anytime during the process if needed. Remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly. 4) This solution is reusable; check the pH and add fresh Oxy Rocks if needed.
Oxalic Acid (Generally for Quartz only): If you are working with a stubborn stain or complex iron issues, try adding a small amount of Oxalic acid to the solution (2-3 ounces per gallon). This should remove any remaining stains without burning or discoloring. Then after a rinse and inspection place in a fresh solution of 20:1 Oxy Rocks and water only. Check daily until satisfied with the results. Remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly.
Commercial Method (Generally for Quartz only): Start with 1 lb. Oxalic acid to 5 gallons of water, mix well; don't breath fumes, and always wear rubber gloves and glasses. Place specimen and put a lid on container, leave for several days to a week; remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly. Place in 20:1 solution of Oxy Rocks and water, (this removes any remaining debris). Use the "General Use" instructions above for final stage.
Helpful Hints to aid the cleaning process:
1) An Aquarium pump (not expensive) to keep the solution moving. A pump with a light can help keep the solution warmer; a pump with suction cups will vibrate the tub with subsonic vibrations. 2) An old crock pot to warm solution to a range between 110F- 125F. In warm summer climates, leave solution container in direct sunlight for ambient warming. 3) A few drops of soap (Dawn liquid) to act as a surfactant is okay, not too much as this will raise the pH. 4) Textile cleaning gun: 1200-1600psi, several models available. 5) Mineral Solubility: Gem and Mineral Data Book ,John Sinkankas (1988) ISBN 0-945005-01-6
Material Data Safety Sheet: MSDS is shipped with each order, if you would like a copy please email that request.
If any questions, comments, or suggestions contact us at info@oxyrocks.com
Directions for use: Oxy Rocks Concentrated solution was developed to be diluted between 5:1 and 20:1 with common tap water. This cleaner is non-gaseous, and produces no dangerous fumes. It works well at room temperature, also in an ultrasonic bath. If heat is used, optimal results are found at around 120F. Solution becomes corrosive at temperatures above 150F. Always test on small amount of any lesser specimens before cleaning your prizes.
Methods for best results: This solution is aggressive on zinc, calcium, manganese, and possibly other minerals; always test with lesser specimens to evaluate the reaction. It is less aggressive on stubborn or complex iron stains.
General Use: 1) Clean specimen with water or soap and water. Use a toothbrush or scrub brush as needed, avoid brass or metal brushes. Remove as much dirt and loose matter as reasonable. 2) Check your tap water before making solution, if pH is 8 or higher consider using distilled water; if lower than 7, this will aid the solution. Oxy Rocks works best between a pH of 0.5 and 4.0, the optimal pH is around 2.0. Make a solution approx. 20:1 to start with (2.5 to 3 ounces to a gallon of water) in a plastic container with lid to prevent spillage. 3) Immerse specimen with tongs or rubber glove. Wait, be patient. Check daily, look for residual to appear on bottom of container. You can rinse and re-scrub specimen anytime during the process if needed. Remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly. 4) This solution is reusable; check the pH and add fresh Oxy Rocks if needed.
Oxalic Acid (Generally for Quartz only): If you are working with a stubborn stain or complex iron issues, try adding a small amount of Oxalic acid to the solution (2-3 ounces per gallon). This should remove any remaining stains without burning or discoloring. Then after a rinse and inspection place in a fresh solution of 20:1 Oxy Rocks and water only. Check daily until satisfied with the results. Remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly.
Commercial Method (Generally for Quartz only): Start with 1 lb. Oxalic acid to 5 gallons of water, mix well; don't breath fumes, and always wear rubber gloves and glasses. Place specimen and put a lid on container, leave for several days to a week; remove specimen, place in diluted solution of baking soda to neutralize, rinse thoroughly. Place in 20:1 solution of Oxy Rocks and water, (this removes any remaining debris). Use the "General Use" instructions above for final stage.
Helpful Hints to aid the cleaning process:
1) An Aquarium pump (not expensive) to keep the solution moving. A pump with a light can help keep the solution warmer; a pump with suction cups will vibrate the tub with subsonic vibrations. 2) An old crock pot to warm solution to a range between 110F- 125F. In warm summer climates, leave solution container in direct sunlight for ambient warming. 3) A few drops of soap (Dawn liquid) to act as a surfactant is okay, not too much as this will raise the pH. 4) Textile cleaning gun: 1200-1600psi, several models available. 5) Mineral Solubility: Gem and Mineral Data Book ,John Sinkankas (1988) ISBN 0-945005-01-6
Material Data Safety Sheet: MSDS is shipped with each order, if you would like a copy please email that request.
If any questions, comments, or suggestions contact us at info@oxyrocks.com
Our contact information
Business email address: sales@oxyrocks.com
By standard mail:
Oxy Rocks
P.O. Box 2322
Loomis, Ca. 95650
By phone:
916-660-0314 (between 9 a.m. and 5 p.m. PST)
Shipping Information:
We presently ship with UPS and included flat ground rate (5-7 days) for continental U.S. in shopping cart checkout for your convenience, and lowest shipping cost. If you require next day, 2nd day or other shipping standards please contact us. Overseas and international shipping is available (where acceptable); please contact us for details. If you hold shipping accounts with other shipping providers please communicate this so we can best meet your needs.
sales@oxyrocks.com
Legal Disclaimer: Neither the manufacturer nor the seller make any warranty, guarantee, or representation, express or implied, concerning this material. Manufactures only obligation shall be to replace such quantity of the product proved to be defective. Neither the manufacturer nor the seller shall be held responsible in any manner for any personal injury or property or other type of loss resulting from the handling, storage or use of this material. User shall determine the suitability of this product for its intended use and assume all risk and liability in connection therewith.
sales@oxyrocks.com or phone @ 916-660-0314
sales@oxyrocks.com or phone @ 916-660-0314
 |
*Professional Quality
* Easy to use
* Increase profits
* Long Lasting
* Cleans Gemstones
* Mineral Specimens
* Gem Rough
* Gold
* Jewelry
* Diamonds
* Quartz
* Quartz Crystals
* Fossils
* Artifacts
* Also works as Ultrasonic Solution
** Made in USA **
